Group · Historically Focused · Intermediate

Actreo

Group Members: Baroness Linnet del Grenewode,

Location: Barony of Carolingia, East

Category/Level: Historically Focused/Intermediate

About Actreo: The two of us are a couple who have been in and out of the SCA for years. We heard about the Challenge from people in our local group. We will be making garments that we have wanted to make for a while. The inspiration of this challenge is a gift right now.

Project Update Blog: Crafting Ourselves – An SCA Arts and Sciences Journey

Their Project: We will be making a set of clothes for a high status (Thegn level) man and woman from England in the mid 11th Century. These garments will be based on artwork and writings done in period, as well as fragments from grave finds. We have been researching on this period for a while, but have yet to make a set of historically accurate clothing for the late Anglo Saxon time period. We need a set of court garb, not just pennsic clothes. We will be making for the man a shirt, trousers, tunic and cloak, and for the woman a smock, gown, mantel, and veil, as well as a number of smaller pieces.

Layer 1

We are making clothing suitable for an Anglo Saxon man and his wife who are high status individuals (Thegn level). There is little evidence of how the underlayer of clothing looked in the form of illuminations or grave finds for this time period for anglo saxon culture in England. There are many written sources, particular the words in Old English used for garment types. We used 2 main sources of information for making our decisions on how to make this: Dress in Anglo Saxon England by Gale Owen-Crocker, and the Authenticity Guide for Regia Anglorum.

For the man, the first layer would be a linen shirt or tunic, and either trousers, or hose and braies. We chose to make a simple shirt similar to those made elsewhere because the word Scyrte implies a shorter garment, rather than a full undertunic. the shirt has square gussets under the sleeves, and a keyhole neckline bound with silk.Hose and Braies were coming in as a style, but the anglo saxon trousers were still worn. After looking at, and experimenting with several reconstructions of early trousers starting with the iron age Thorsberg trousers, we decided to make the trousers by starting with 2 tubes with a seam down the inner leg. We tried several types of gussets and gores, and found that for us, they fit the best by taking in the lower legs, and adding a square crotch gusset. We left the bottom of the inseam open for the last few inches to get the trousers on over the foot. The trousers were held up with a linen twill tape tie. There was evidence for either ties or belts for this. There are old english words for what is assumed to be a loin cloth, but we opted to stay with modern underwear underneath.

For the woman, the first layer is a linen Smoc made in a similar pattern as layer 2 will be. We used the Nockert Type 1 form of tunic, as this is the most common type of tunic found around the 11th century. This tunic has square underarm gussets and side gores. We did not use center gores. Images of women’s clothing at this time appear to be mainly vertical in line, without much flaring out from the waist. The sleeves were very long and tight. The look at this time was for smoc sleeves to go over the hand some, and to have wrinkles on the forearm. The cuffs and necklines were bound with silk. There was a thriving silk trade in England at this time, and silk ribbons and strips were commonly used if one could afford it. The cap is to cover the hair so it does not show under the veil or wimple that will be added later. There are words for this garment like Feax Clap (head cloth), but what it looked like is up to interpretation. We used the English Cap proposed by Regia Anglorum for this. It is similar to a viking cap, but rounded at the top, and larger, so that all of the hair is covered. Some people use something like a St Birgitta cap, but that would seem to be to late to be used at this time.

All sewing was done by hand using waxed thread (linen for linen, silk for silk). Construction seams were done in back stitch; flat fell with whip stitch; and attaching strips to the edges with running stitch.

Both Linnet and Kendrick worked on this layer. Both of us worked on pattern development. Linnet did most of the construction sewing. Kendrick did the embroidery embellishment on the cap. He will be making many yards of fingerloop braid for the next 2 layers, as well as tablet weaving, and has already started working on those.

Layer 2

We are making a set of clothes for an 11th Century Anglo Saxon high status man and woman. Layer 2 consists of tunics. The term Tunece applies to male garments. The term Cyrtel used to apply to short male garments, but by this point in history was used for longer female tunics. Both garments were Nockert type 1 tunics with square gussets under the sleeves, and triangular side gores, and were made from the same medium weight tabby woven blue fabric. A reproduction red silk was used on the cuffs and necklines. Silk was readily available in England at this time. The most common use was to cut the fabric into strips and use it to trim the edges of garments. Both the Tunece and Cyrtel had 3 cm wide strips on the bottom of the sleeves, and the Tunece had an additional woven band of gold silk on it. The Tunece had a square keyhole neck. This was a style seen in illuminations from England during this time period. It had a silk facing which comes to a point in the center front. The Cyrtel had a round keyhole neck, with the edge bound in silk. Women’s necklines were rarely seen, so would probably not be as showy as men’s.

We had planned on adding blue fingerloop braid to many of the seams, and gold braid to the collars and cuffs. Experimental trials made with silk cord indicated that it would take far, far more time with silk than previous trials with cotton or wool. Weaving the silk into a narrow strip also gave problems with tension and smoothness of weave compared to other fibers. We ended up settling for two woven bands to put on the Tunece, with the thought we might come back to this later. Linnet did the sewing, and Kendrick did all the work with braiding and weaving.

Layer 3

We are making a set of clothing for a high status anglo saxon man and woman. Layer 3 consists of a cloak for the man. It is made of a heavy brown wool with the rectangular construction common in this period. The long edges of the cloak were bound with red silk taffeta ribbon, and trimmed with a two color hand woven silk band. Layer 3 for the woman has 2 parts. The cloak during this period for high status women is a semi-circle of wool sewn into a cone shape with a neck opening. This style is believed to be copied from chasubles seen in byzantine art. Our cloak was made from a soft tan wool, and was worn either with or without a sash. The head covering for Layer 3 is a long rectangular veil of wool gauze. These veils were worn draped around the head over the cap. Lower status women tended to wear a more hood-like garment. In art, these veils are generally shown in a color other than white. For our project, the veil was dyed with black walnut. Several trials were done to try to get the color even. It was decided not to mordant this veil to darken the color with iron, for fear of damaging the fine wool gauze. Walnut has enough tannin, that a mordant is not required on wool. Kendrick did most of the work on the cloak, and Linnet sewed the mantle, and dyed the wool for the veil.

Bonus Points

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s