Advanced · Historic Advanced · Historically Focused

Bartholomew Sharpe

Location: Barony of Bergental , East

Category/Level: Historically Focused/Advanced

About Bartholomew: I have been a member of the SCA for approximately 6 years. I have been involved in other forms of reenacting on and off since I was 13 (23 years or so). My main areas of interest is the material culture of 16th and early 17th century England. I have been sewing seriously for about 5 years. This past year I have been focusing on making completely hand-sewn garments. While I have a good understanding of making the garments I plan to enter, the challenge to me will be in trying to use a number of period techniques that I have only recently learned.

His project: I plan on recreating a complete English middle class men’s outfit from the turn of the 17th century. I am looking to recreate what would have been worn by a yeoman farmer or middle class tradesman in the years 1595-1610. The outfit will be based off of a variety of period artwork, as well as extant garments. It will include: shirt, doublet, hose, and jerkin. I plan on hand sewing the entire outfit. If time allows I may also make a belt, purse or knitted hat to round out the outfit.

The Complete Garment

His final thoughts on his C3 experience:

What a fantastic idea for a competition! This is one of the few A&S challenges that I have gotten excited for in a while. The ability to make an entire outfit from the skin out was a fantastic way to try new techniques and get better at other skills. Huzzah for the organizers of this challenge!

Layer 1

I am checking in my first layer, a linen shirt appropriate for the late 16th to early 17th century. The shirt forms the basic function of underwear during the time period. It is made very long to act as both a covering for the body and the hip area. The pattern is very basic and seems to have been fairly universal across western Europe for the times. It is constructed completely of linen fabric and linen threads of different weights. It was drafted using the “bara” system as describe in the Modern Maker book series (late 16th/early 17th century methods). Shirts similar to the design I used are found in many museums and covered in detail in Patterns of Fashion 4, by Gannet Arnold.

Layer 2

My second Layer consists of a linen canvas doublet and wool hose. These 2 items represent the basis of all men’s outfits from the 15th to the 17th century. The doublet is made in the style of the late 16th century to early 17th century. It is made from a linen twill outer layer, interlined with linen canvas, and lined in a light weight linen. The doublet is completely sewn by hand using various weights of linen thread. The buttons are of pewter. The button design was taken from a number of extant examples shown on The Portable Antiquities Scheme (finds.org.uk), as well as examples found on the wreck of the Vasa. I first carved the button masters in wax and then used a 2 part mold to cast them. The hose are representative of the style commonly referred to as “trunk hose”. They were a common style seen from the 1560s through the 1620s in various configurations. The are made from charcoal or “sheeps black” wool fabric, and lined in linen. They are sewn by hand using both linen and silk threads (silk for the buttonholes and eyelets). The raw edges of the hose and pockets are bound in a linen tape.

Layer 3

My third layer consists of a leather jerkin. It is based on period art as well as some surviving examples of English jerkins from the second half of the 16th century. Since I am attempting to recreate a “working mans'” outfit I chose to leave it mostly undecorated. I did however add leather piping with tiny slashes to the seams to give it a bit of flare. It is made from purchased modern chromium tanned leather, this was a mistake on my part. the chromium tan leather does not lend itself to being hammered flat. On one example in the Museum of London, the seams allowances are hammered very flat, being vegetable tanned it is much easier to do that on than chromium tanned leather. The pewter buttons are cast by myself. They are inspired by examples found on The Portable Antiquities Scheme website. I chose to piece one of the skirts together as an added historical touch. Many examples of surviving clothing incorporate piecing and I felt it helps to achieve a more historically correct garment.

Layer 4

My fourth accessory layer consists of a knitted hat. The knit hat is based on the styles seen in period art and examples in the Rijksmusem in Amsterdam. It was knit in the round from bulky wool, it was then fulled (felted) by hand. The hatband is made of a 4 strand braid of wool yarn that I dyed with madder root.

Layer 4+

My four+ accessory layer consists of a girdle belt, belt purse, and a cloak.

The girdle belt is made from vegetable tanned leather (purchase) and was dyed with black walnut juice. The buckle for the belt was sand cast in brass. The design for the buckle came from an example I came across on the Portable Antiquities Scheme and is dated from 1500-1650.

The belt purse is made from vegetable tan leather (purchased) and again dyed with black walnut juice. The purse is based on purses seen in period artwork, as well as an example found in the Netherlands.

In the end I decided to make up a cape to go with this outfit. It is handsewn with a coarse thick wool similar to that describe as ‘frieze’ in period. It is lined with linen, and closes with brass hook and eyes I made.

Bonus Points

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s